General Connection And Applications; Connecting The Monitor To The Computer - Hitachi CML155XW Service Manual

HITACHI CML155XW LCD Monitor Service Manual (v1.0)

5. General Connection and Applications

Procedures for installing and using this CML155XW LCD monitor are described as
below.
5.1 Connecting the monitor to a computer
1) Place the display on a flat, sturdy surface. Choose an area free from excessive heat,
moisture, and sunlight. Avoid possible sources of electromagnetic interference, such as
transformers, motors, and fluorescent lighting.
2) Locate the AC power adapter with attached power cable and then connect the power cable
to the power jack on the back of the display. Plug the three-prong power cord into a power
outlet, and plug the other end into the AC power adapter. The three-prong power cord is a
shielded type and is provided as a safety precautions to ensure proper electrical grounding.
Power jack
3) Plug the D-SUB 15-pin analog video signal cable (or 20-pin DFP cable) into the Analog
(or Digital) Video Input port on the back of the display. Connect the other end of the video
cable into your computer's video port. The assignment of the pins of the connector is as
follows:
12
Analog video
input port
Digital video
input port