Table of Contents
Advertisement
HITACHI CML155XW LCD Monitor Service Manual (v1.0)
4) PCB Assembly Removal:
Caution:
When serving or replacing the panel, disconnect the DC power jack completely.
(a) Unplug all connected wires from the PCB.
(b) Remove 3 screws indicated as "C" from the inverter board, and then remove the board
carefully. (left side in Fig. 4-3)
(c) Remove 3 screws indicated as "D" from the audio board, and then remove the board
carefully.
(d) Remove 7 screws indicated as "E" from the main board connected with front cover. (Fig.
4-3)
C
Fig. 4-3
5) Panel Removal:
(a) Remove 6 screws indicated as "F" from the front cover (Fig. 4-3) to remove the panel.
D
F
11
E
Advertisement
Table of Contents
