Advertisement
● Set Clock:
After entering the setting interface,press the
"Confirm" key to select the clock setting
interface
the number which indicates "Hour" and
key will start to blink at the same time. Each press
of the "Set" key increases the "Hour" by 1. Press
and hold the
Set" key to increase the "Hour" by
"
for every 0.5 seconds.
key, the number which indi cates "Minute" and the
"Set" key will start to blink at the same time.
Each press of the "Set" key will increase the
Press and hold the "Set " key to
"Minute" by 1.
increase the "Minute" by 5
It automatically starts over from 0 after
maximum time. After setting, press the"Confirm"
key to exit setting. Press the "Confirm" key again
to select other parameters.
● Set Rinse Duration:
After entering the setting interface,press the
"Confirm" key to select the rinse tons setting
interface
and the number and
blink at the same time. Each press
key will increases rinse duration by 30 seconds.
Press and hold the "Set " key to increase rinse
duration by 30 secondsfor every 0.5 seconds.
The maximum duration is 300 seconds. It
automatically starts over from 30 se conds after
the maximum . After setting, press the"Confirm"
key to exit setting. Press the "Confirm" key again
t o select other parameters.
●KOHLER Konnect Network Connection
(for Cloud Version)
1. The device is automatically connected to the
network after it is powered on
with the "
" icon blinking. Once connected,
the "
" icon will remain lit.
2. Manual Network Connection: After entering
the setting interface, press the "Confirm" key
to select the manual
interface
a connecting animation shows.The interface
displays
setting, press the
1350522-T01-A
. After tapping the "Set" key,
the "Set"
After pressing the "Confirm
for every 0.5 seconds.
the
. After tapping the "Set" key,
the "Set" key will start to
of the "Set"
network connection
. Tap the "Set" key, and
after it is connected. After
"Confirm" key to exit setting.
● 设置时钟：
进入设置界面后；按压"确认"键，选择设定
时钟界面；
"时钟" 位 和"设置"键同时闪烁， 此时每按压
一次"设置"键增加
每 0.5
秒增加 1 小时；按压"确认"键， " 分钟"
1
位和"设
置"键同时闪烁，此时每按压一次
"
"设置"键增加
秒增加 5 分钟；达到最大值后自动 从0开始。
设置完成后按"确认"键，退出设置，再次按
"确认"键选择其他参数。
● 设置冲洗时长：
进入设置界面后；按压"确认"键，选择设定
冲洗时长界面；
"数字" 和"设置"键同时闪烁， 此时每按压一
次"设置"键增加 30 秒，长按"设置" 键 每
0.5 秒增加300 秒； 最大时长300秒，达到最大值
后自动从30 秒开始。 设置完成后按"确认"键，
退出设置，再次按 "确认"键选择其他参数。
●科勒云境配网 ( 云智能版适用 )
、设备上电后自动进行配网
1
" "图标闪烁， 配网成功后 " "
，
2、 手动配网：进入设置界面后；按 压 "确认" 键，
选择手动配网界面
键，设备进入配网动画；
显示
退出设置。
-14-
；轻按"设置" 键；
1 小时，长按"设置" 键
1 分钟，长 按 "设置"键 每 0.5
；轻按"设置" 键
；轻按"设置"
配网成功后界面
设置完成后 按 "确认" 键，
。
，此时
图标长亮。
Advertisement
