Cleaning And Maintenance - Jimmy JF41 Pro User Manual

Remove device from App
If the user needs to remove the device, click the main page of App, long press the device name,
and click "Remove device". The mobile App will pop up "Delete device or dismiss group?",click
"Confirm".Remove the device successfully, click "Done" to return to the interface.
Notes:
1.If the 'WiFi" indicator is always on,it means the device is connected to the network.
2.If the 'WiFi" indicator flashes, it means that the device is not connected to the network. Please reconnect
and check whether the home network and mobile phone are connected properly.
For more information about the features and content of the App, please download and use it to understand,
and user can also check the "FAQ&Feedback" in the APP.

Cleaning and Maintenance

Note:
1. In order to effectively use the machine, please carry out maintenance every two weeks according to the
following method during continuous use.
2. Be sure to pull the adapter out of the socket before disassembly and cleaning.
3. Hold the fan tightly to prevent hand clamping when disassembling.
Disassembly and assembly of machinery
Disassembly
1.Close the machine, press and hold the
release button on the support pole, pull out the
fan components(or not), and screw down the
bottom screw of the decorative ring with a cross
screwdriver. (Picture 8)
2. Rotate the front cover clockwise, and remove
the front cover after the arrow "
cover points to " "from " ". (Picture 9)
3. Hold the fan blade in one hand, turn the fan
knob clockwise with the other hand, and remove
the fan blade. (Picture 10)
4. After removing the fan blade, rotate the cover
plate of the rear cover counterclockwise and
remove the cover after unscrewing. (Picture 11)
The installation
After the cleaning of all parts of the fan components,
they can be assembled in reverse according
to the disassembly sequence. Please note the
following points:
1. When the rear cover is assembled with the
motor & control part, the anti-stay groove of
the rear cover shall be aligned with the clamp
groove of the motor & control part, and the
cover plate of the rear cover shall be tightened.
(Picture 12)
2. When installing, please note that the groove
behind the fan blade shall be stuck on the limit
pin of the motor shaft. (Picture 13)
11
" on the front
12
13
Rear Cover
Clamp groove
Anti-stay groove
Groove
Cover plate of
the rear cover
Limit pin
7