Step 3. Establish A Network Connection - Hisense 43H6D+ Quick Start Manual

STEP 3. Establish a network connection

1. Press the [ ] button on the remote control, press[
2. Select Network → Network Configuration.
External Modem
(ADSL / VDSL / Cable TV)
Modem Cable
Establish a wired network connection
Automatically obtain an IP address
1. Select Ethernet. The TV will automatically obtain an IP address and connect to the network.
NOTE: The default option of IP Settings Mode is DHCP.
2. If the connection fails then "Disconnected" will display for the Ethernet status. Retry or enter the IP Settings, select Manual to input
the information again.
Manually enter the IP address
1. Select Manual.
2. Enter the IP Address, Netmask, Gateway, DNS 1 and DNS 2 in the menu. Next, select Save.
IP Sharer (Router)
(with DHCP server)
LAN Cable
˅
] button to select Settings and then press [OK] to enter the Settings menu.
TV JACK
LAN
LAN Cable
9