Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Fransgard DM-2850
Summary of Contents for Fransgard DM-2850
- Page 1 Fransgård Manual DM-2850 Disc mower From serial number : 57450001 →...
- Page 2 Fransgård Maskinfabrik A/S Fredbjergvej 132 DK - 9640 Farsø Phone: +45 98 63 21 22 www.fransgard.dk mail@fransgard.dk...
- Page 3 LIST OF CONTENTS Page Technical Specifications ............1 Safety Precautions ..............2 Assemble instruction ............. 2 Working position ..............2 Overload release ..............3 Transport position.............. 3 Ordering spare parts ............. 3 Lubrication and Maintenance ..........3 Mounting of Disc with hat ............
- Page 4 SAFETY PRECAUTIONS All screens must be correctly positioned and checked before starting the machine. Take care for stone fling. It is not advisable to remain in the working area of the machine while working parts are rotating. The machine is made to work in grass and straw crops, and must not be used for anything else.
- Page 5 OVERLOAD RELEASE. The overload release near the three-point lift is a safety guard which allow the cutter bar swing backward if it hit's into the ground, when it happens then stop the PTO. and drive backward and the overload release are going to lock again. TRANSPORT POSITION Change-over from working position to transport position is as follows:...
- Page 6 Mounting of Disc with hat. Remove the nut, small disc and protection bushing from the shaft. Mount the Disc with hat, as shown on the picture, with the small disc and nut. Mount the plastic cover on the top. (You shall not use the protection bushing)
Need help?
Do you have a question about the DM-2850 and is the answer not in the manual?
Questions and answers