Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Fransgard K-240
Summary of Contents for Fransgard K-240
- Page 1 Manual Fransgård K-240 Disc mower From serial number : 133023 →...
- Page 2 Fransgård Maskinfabrik A/S Fredbjerg DK - 9640 Farsø Telefon : +45 98 63 21 22 : +45 98 63 18 65 www.fransgard.dk mail@fransgard.dk...
- Page 3 LIST OF CONTENTS Page Technical Specifications ..............1 Safety Precautions ................ 2 Assamble instruktion ..............2 Working position ................3 Overload release ................3 Transport position..............3 Ordering spare parts ..............4 Lubrication and Maintenance ............4 TECHNICAL SPECIFICATIONS Working width ..............
- Page 4 SAFETY PRECAUTIONS All screens must be correctly positioned and checked before starting the machine. Take care for stone fling. It is not advisable to remain in the working area of the machine while working parts are rotating. The machine is made to work in grass and strawcrops, and must not be used for anything else.
- Page 5 OVERLOAD RELEASE. The overload release near the three point lift is a safety guard which allow the cutterbar swing backward if it hit's into the ground, when it happen then stop the PTO. and drive backward and the overload release are going to lock again. TRANSPORT POSITION Change-over from working position to transport position is as follows:...
- Page 6 ORDERING SPARE PARTS The spare part order must contain the following information: 1. Machine type. 2. Spare part number and description-possibly dimensions and number of parts. LUBRICATION AND MAINTENANCE Lubricate PTO shaft after every 10 hours of operation, and lubricate the indicated lubrication points as and when required.
Need help?
Do you have a question about the K-240 and is the answer not in the manual?
Questions and answers