L7 Ovvneds Manual Supplement
Sped<er Placement
Bi-Wiring and B¡jAnplification
g'
3 '
side-mounted
woofers face inward
Drawing L-B - L7 position front view
é,
L7 Placement
Drawing L-A and L-B show
optimal placement for your L7
loudspeakers. Note that the
speakers' side-mounted woofers
should be placed inwards towards
the center of the room.
Bi-wiring
The L7's outer connection Panel
and internal dividing network are
designed so that separate sets of
speaker cable c¿n be attached to
the woofer (LF) and midrangd
treble (HF) portions of the dividing
networlc This confìguration is
alledbi-wirîng.
Bi-wiring can provide several
sonic advantages and considerably
more flexibility in power amplifier
selection.
Reduction of intermodulation
The majority of current flowing
between an amplifierand speaker is
devoted to the reproduction of
bass. fn frLæ"60% or more of an
amp's power is destined for the
woofers. When current flows
through a wire, it produces a
magnetic fìeld (EMF) which
expands and collapses at a rate
Drawing L-A - L7 position top view