HDMI-8x8 WHAT’S IN THE BOX There are two combinations of OG-DA-HDTV-SDI-UHD products OG-DA-HDTV-SDI-UHD-SET-1 1 x OG-DA-HDTV-SDI-UHD-MB • 1 x OG-DA-HDTV-SDI-UHD-RM • 1 x R45 to DB9 RS-232 adapter cable • OG-DA-HDTV-SDI-UHD-SET-2 1 x OG-DA-HDTV-SDI-UHD-MB • 1 x OG-DA-HDTV-SDI-UHD-RM • 1 x R45 to DB9 RS-232 adapter cable •...
OG-DA-HDTV-SDI-UHD 3.0 Specifications Description HDMI 2.0 to 12G SDI converter (no scaling) HDMI Input Up to HDMI 2.0 HDMI Output Up to HDMI 2.0 SDI Output Up to 12G SDI 4:2:2 10 bit Optional Fiber Output SFP with LC connectors, single mode up to 10 km Analog audio Output 3 Pin Pheonix Connector Embedded audio Output...
Dashboard Control Getting Started The Dashboard software is design to allow you to quickly access the feature sets of openGear form factor cards on a simple User Interface. This section will help you get up and running as quickly as possible.
OG-DA-HDTV-SDI-UHD OG-DA-HDTV-SDI-UHD Dashboard GUI OG-DA-HDTV-SDI-UHD is a very straight forward plug and play card. The Dashboard interface does not provide any configuration, APANTAC LLC, 10200 SW ALLEN BLVD, BEAVERTON, OR 97005 INFO@APANTAC.COM, TEL: +1 503 968 3000, FAX: +1 503 389 7921...
OG-DA-HDTV-SDI-UHD Appendex A COPYRIGHT, TRADEMARK, and REGISTRATION All rights reserved by APANTAC LCC, Beaverton, Oregon, USA. No part of this document may be reproduced in any form or by any means without written permission from the product manufacturer. Changes are periodically made to the information in this document.
Need help?
Do you have a question about the OG-HDTV-SDI-UHD and is the answer not in the manual?
Questions and answers