Alarm Setting; Screen Contrast/Brightness; Languages; Sleep Timer - JBL On Time Owner's Manual

5) Tune to the desired frequency using "Left/Right" buttons
6) PRESETS: Press and hold the Enter button
7) Use "Left/Right" button
8) Press the "Menu Up/Back" button
9) Use the "Left/Right" button

Alarm Setting:

1) Press the "Menu Up/Back" button
2) Use "Left/Right" button
3) Use "Left/Right" button
4) Select "Time" and press Enter
5) Enter time for alarm and day
Day mode options are: ED-everyday, WD-weekdays and WE-weekend
6) Use "Left/Right" button
7) Use "Left/Right" button
8)
To enable the alarm, press the "Alarm 1"
Waking to you iPod:
1) Use steps for alarm setting and choose iPod as the source.
2) On your iPod, choose the song you would like to awaken you ** . And press play***.
3) The volume will start at a low level and ramp to a higher level.
4) Place your iPod to sleep by holding down the "play/pause" button. (Older iPod models will vary)
5) The JBL On Time can be put to sleep by pressing the power button.
** Some versions of iPod software may behave differently.
If you choose the last song on your iPod, please place iPod in repeat mode, this ensures the iPod will continue to play the last song.
***

Screen Contrast/Brightness:

1) Press the "Menu Up/Back" button
2) Use "Left/Right" button
3) Select "Extras" and press Enter
4) Select "Screen" and press enter
5) Select "bright" or contrast" and press Enter
Select desired setting and press Enter

Languages:

1) Press the "Menu Up/Back" button
2) Use "Left/Right" button
3) Select "extras" and press Enter
4) Select "Lang" and press Enter
Select desired language and press Enter

Sleep Timer:

1) Press the "Menu Up/Back" button
2) Use "Left/Right" button
3) Select "Sleep" and press Enter
4) Press Enter to Select On or Off
5) Use "Left/Right" button
Select desired time and press Enter

Snooze:

1) Press the "Menu Up/Back" button
2) Use "Left/Right" button
3) Use "Left/Right" button
Select desired Snooze time and press Enter
Document Number: 950-0068-001
. Hold either button and release to scan for the next station.
to select preset number and press Enter
to exit
to navigate the presets
until you reach the "JBL On Time" screen
to select "Alarms" and press Enter
to Select "Alarm 1," or "Alarm 2" and press Enter
to select "Source" and press Enter
to select the desired wakeup source and press Enter
or "Alarm 2" buttons (An alarm icon on the main screen will indicate Alarm 1 or Alarm 2 status
until you reach the "JBL On Time" screen
to select "Set" and press Enter
until you reach the "JBL On Time" screen
to select "Set" and press Enter
until you reach the "JBL On Time" screen
to select "Set"
to select "Minutes" and press Enter
until you reach the "JBL On Time" screen
to select "Ala rms" and press Enter
to select "Snooze" and press Enter
Description: MANUAL, JBL On Time
)
Page 4 of 49
Revision: 09