Table of Contents
Advertisement
The appliance comes with an Aqua-
Sensor.
During the rinse cycle, the Aqua-
Sensor checks the degree of tur-
bidity of the rinsing water, and ad-
justs the duration and number of
rinse cycles accordingly.
Energy saving mode
If you do not use the appliance for an
extended period, it automatically
switches to energy-saving mode. All
displays go out and Έναρξη/
Προσθήκη ρούχων flashes.
Energy-saving mode ends when you
use the appliance again, e.g. if you
open or close the door.
Installation and connection
Installation and connec-
tion
You can find out where and how best
Installation and connection
to install your appliance here. You
will also learn how to connect the ap-
pliance to the water and power sup-
ply.
Unpacking the appliance
Note: Please read the information in
the "Safety" → Page 4 and "Prevent-
ing material damage" → Page 11 sec-
tions to ensure that you use the appli-
ance safely.
Installation and connection en
ATTENTION!
Objects remaining in the drum that
are not designed for operation with
the appliance may cause material
damage and damage to the appli-
ance.
Remove these objects, along with
▶
all supplied accessories, from the
drum before starting the appliance.
Remove any packaging and pro-
1.
tective covers completely from the
appliance.
For the environmentally friendly
disposal of the packaging materi-
als, observe the information on the
topic of
→ "Disposing of packaging",
Page 12.
Check the appliance for visible
2.
damage.
Open the door.
3.
→ "Basic operation", Page 33
Remove the accessory from the
4.
drum.
Close the door.
5.
13
Advertisement
Table of Contents
