JBL Control Control Now Owner's Manual page 20

SPEAKER WIRING
There are four possible ways of wiring the JBL Control NOW speakers when using the pole-mount kit.
1. Use the cable assembly provided to wire the units for a single channel.
Cable Assembly
A
D
Single-channel-wiring diagram.
2. Use the multiunit wiring adapters to wire the units for two channels.
NOTE: There are two options for 2-channel wiring:
2A. Even sound distribution – Use this connection for even sound distribution
through both channels. This may be more
appropriate for larger rooms.
Channel 2
A
Channel
1
Multiunit
Wiring Adapter
Channel
2
D
2-Channel-wiring diagram for even sound distribution.
20
B
C
Channel 1
B
Channel
2
Multiunit
Wiring Adapter
Channel
1
C
2B. Stereo sound distribution – Use this connection for a smaller
home theater/stereo environment.
Channel 1
A
Channel
1
Multiunit
Wiring Adapter
Channel
1
Assemblies
D
2-Channel-wiring diagram for stereo sound distribution.
3. Use four sets of cables to wire the units for four channels.
Channel 2
Channel 1
A
Channel
1
Channel
2
D
4-Channel-wiring diagram.
Channel 2
B
Channel
2
Multiunit
Wiring Adapter
Channel
2
Terminal
C
Channel 3
Channel 4
B
Channel
4
Channel
3
C