Jeulin 452 146 Manual page 9

®
ESAO Method
CTM Conductimeter
®
Adaptator ESAO 4
Ref :
452 146
ENGLISH
2.6 Software
This adaptor may be used with the dedicated software:
•
Généris conductimetry application
•
Generis 4 software
•
Generis 5 software (Part no. 000720)
If the adaptor is not automatically recognised then proceed as indicated in
2.7.
2.7 Creating the Conductimeter adaptor in the
Généris 4 adaptors file.
2.7.1 With Generis 4
From the Start menu of Windows, go to Programs and select Généris: the
following menu is displayed.
Select the ESAO Adaptor submenu: The following programme is displayed.
In the No. section, enter the code 43 (ESAO4 Conductimeter).
In the name section, enter Conductimeter_CTM
In the type section, select MONOSENSOR.
The unit is mS/cm.
7