General Information - Jeulin 452 146 Manual

®
ESAO Method
CTM Conductimeter
®
Adaptator ESAO 4
Ref :
452 146
Rated capacity
controllled by the
software
ENGLISH

1 General information

This adaptor helps carry out conductivity measurements with the ESAO4
system.
It is used with the CTM conductimeter probe (part no. 701 329). It is
equipped with a manual temperature compensation function.
Calibration
button
Safety sockets
for connecting
the probe
2 USE
2.1 ESAO System
This adaptor works with ESAO 4, i.e.
•
An ESAO 4 interface card
•
An ESAO 4 console.
Or
•
An ESAO 4 Plus console
2.2 Connecting the adaptor to the ESAO console
The adaptor is connected using the connector located at the back of the box:
•
Hold the box horizontally
•
Follow the guide slots of the ESAO console
•
Engage it fully.
Part no.: 451 300 or 451 100
Part no.: 451 101
Part no. : 451 401
5
Connection to
the console
Button for adjusting the
manual temperature
compensation