Related Manuals for Ready Rack RFSS-18
Summary of Contents for Ready Rack RFSS-18
- Page 1 Red Rack Freestanding WASH • DRY • STORE • PROTECT Single Sided ITEM# RFSS-(# OF COMPARMENTS)/18,20 or 24 ASSEMBLY INSTRUCTIONS & PARTS LIST 2021-1 (800) 991-9120 • SALES@GROVES.COM • WWW.READYRACK.COM...
-
Page 2: Tools Needed
PARTS ALL PARTS SHOWN BELOW: - Divider panel - DP-20 OPTIONAL PARTS (Not included) - Hanging grommet - HWGR - Panel end cap - PEC - End cap - ECP - Back frame - BF-18,20 or 24 - Label holder - LAB - End plugs - EPS Glove hanger - Hanging pole - HP - 18,20 or 24... - Page 3 STEP 1 STEP 2 STEP 3 *Determine the length of the locker run you will be Next you will attach the divider panels (DP-20) to assembling. Your order should come with a packing the back frames. You will put a divider in the space IF HAVE THE SECURITY OPTION USE between each back frame and one to the outside of slip.
- Page 4 STEP 3A STEP 3A.1 STEP 4 Before installing the base of the unit you will SPECIAL INSTRUCTIONS: With the base attached to the divider panels **For longer locker runs that will be using multiple need to install the security panels (SP18, 20 or you can now install the adjustable feet.
- Page 5 STEP 6 STEP 7 STEP 5 With the adjustable feet installed, go back Next install the helmet/ boot shelves (HBS-18, Once the helmet shelves are in place you can and tighten up all the bolts of the rack. When 20 or 24). Determine your desired height for the install the hanging pole in each compartment.
- Page 6 STEP 8A STEP 8 INSTALLING OPTIONAL SECURITY DOORS At this point you may install the bunker pant hooks (BPH) and any other optional Starting at the far left locker compartment, attach the door latch to the middle set of pre-drilled holes on the first divider panel.
- Page 7 Please visit readyrack.com/guides to find more information and other assembly instruction guides. "WE TAKE CARE OF THE GEAR THAT TAKES CARE OF YOU" GROVES INCORPORATED 818 TRAKK LN, WOODSTOCK, IL 60098 800-991-2120 • SALES@GROVES.COM WWW.READYRACK.COM...