Advertisement
STEP 8A
STEP 8
INSTALLING OPTIONAL SECURITY DOORS
At this point you may install the bunker pant
hooks (BPH) and any other optional
Starting at the far left locker compartment, attach the door latch to the middle set of pre-drilled
holes on the first divider panel. Put the latch on the inside of the compartment and insert one nut
accessories you have purchased. Such as
into the latch. Insert the screw into the recessed hole on the other side of the divider panel and
additional hangers, helmet holders or personal
tighten with an allen wrench. Move to your right and install the hinge brackets on the second
property boxes.
divider panel. Attach the hinge to the right side of the divider panel at the top set of pre-drilled
holes and insert one nut. Now insert one screw on the other side and tighten with the allen
wrench. Repeat the process with the other hinge bracket on the bottom set of holes. Keep
repeating the entire process working your way to the right. Make sure you have all latch and
hinge brackets attached before installing the security doors.
LATCH
HINGE
INSTALL THE DOOR
6
Advertisement
