Do you have a question about the PRO and is the answer not in the manual?
Questions and answers
Ian Alan Holder
January 18, 2025
how do you turn off "closed caption" on my dvd'
1 comments:
Bill
January 26, 2025
@Ian Alan Holder
Bill
January 26, 2025
My player is playing but TV screen is blank black
1 comments:
Mr. Anderson
February 10, 2025
The Electcom PRO player may be playing but the TV screen is blank due to one of the following reasons:
1. Incorrect Video Connection – Ensure the video cable is properly connected to both the DVD player and the TV. 2. No Signal Connection Settings – Check the TV’s input settings to ensure it is set to the correct input source (HDMI, RCA, etc.). 3. Dirty or Unsupported Disc – Clean the disc or check if it is a supported format. 4. Anti-Copy Circuit Interference – Some discs have copy-protection that may affect video stability. 5. Brightness or Picture Settings – Adjust the TV’s brightness and picture settings. 6. Parental Control Settings – If parental control is enabled, it may prevent video output.
Check these factors and adjust the settings accordingly to resolve the issue.
This answer is automatically generated
Jeff
January 28, 2025
New unit hooked up inserted disc reads No Disc
1 comments:
Mr. Anderson
February 10, 2025
The Electcom PRO unit may display "No Disc" for the following reasons:
1. The disc is inserted upside down. 2. The disc is dirty or damaged. 3. The disc format is not supported (e.g., Blu-ray discs are not supported). 4. The disc is not properly inserted.
To resolve the issue, ensure the disc is clean, correctly inserted, and in a compatible format. If the problem persists, try a different disc.
This answer is automatically generated
Veronica
February 23, 2025
Have DVD set up, but no color on movies, only black and white
1 comments:
Mr. Anderson
February 23, 2025
The Electcom PRO DVD player may be displaying movies in black and white due to incorrect video connection settings. Ensure that the video cable is properly connected and that the correct video output mode is selected. If the TV and DVD player use different video signal formats (such as NTSC or PAL), this can also cause black-and-white playback. Adjust the video system settings in the DVD player's menu to match the TV's format.
Need help?
Do you have a question about the PRO and is the answer not in the manual?
Questions and answers
how do you turn off "closed caption" on my dvd'
@Ian Alan Holder
My player is playing but TV screen is blank black
The Electcom PRO player may be playing but the TV screen is blank due to one of the following reasons:
1. Incorrect Video Connection – Ensure the video cable is properly connected to both the DVD player and the TV.
2. No Signal Connection Settings – Check the TV’s input settings to ensure it is set to the correct input source (HDMI, RCA, etc.).
3. Dirty or Unsupported Disc – Clean the disc or check if it is a supported format.
4. Anti-Copy Circuit Interference – Some discs have copy-protection that may affect video stability.
5. Brightness or Picture Settings – Adjust the TV’s brightness and picture settings.
6. Parental Control Settings – If parental control is enabled, it may prevent video output.
Check these factors and adjust the settings accordingly to resolve the issue.
This answer is automatically generated
New unit hooked up inserted disc reads No Disc
The Electcom PRO unit may display "No Disc" for the following reasons:
1. The disc is inserted upside down.
2. The disc is dirty or damaged.
3. The disc format is not supported (e.g., Blu-ray discs are not supported).
4. The disc is not properly inserted.
To resolve the issue, ensure the disc is clean, correctly inserted, and in a compatible format. If the problem persists, try a different disc.
This answer is automatically generated
Have DVD set up, but no color on movies, only black and white
The Electcom PRO DVD player may be displaying movies in black and white due to incorrect video connection settings. Ensure that the video cable is properly connected and that the correct video output mode is selected. If the TV and DVD player use different video signal formats (such as NTSC or PAL), this can also cause black-and-white playback. Adjust the video system settings in the DVD player's menu to match the TV's format.
This answer is automatically generated
no 3 pin plug uk y