Download Print this page

FanFair FTF-3010 Instruction Manual

Advertisement

Available languages

Available languages

Quick Links

Tower Fan
Instruction Manual
Model: FTF-3010
Features:
Wide Area Oscillation
ON/OFF Push Button with 3 Speed Settings
High Centrifugal Performance Blades
Space Saving Design
6' Cord
Use:
This product is intended for indoor residential or office
use only. Not for industrial or other commercial use.
Use only if the electrical wiring is in good working order
and meets applicable codes and ordinances. If you have
any questions whether the wiring is adequate, consult a
licensed electrician.
While using your product, follow all instruction listed
below. As part of those instructions, we have used the
word WARNING. Disregarding warning may result in
injury or death.
Instructions:
As with all electrical appliances, basic safety precautions
should always be followed to reduce risk of electric
shock,
fire,
or
injury,
precautions:
 Read all instructions before using this fan.
 Use this fan only as described in this manual. Any
other use not recommended by the manufacturer
may cause electric shock, fire, or injury.
 Do not operate this fan with a damaged cord after
the fan malfunctions, or has been dropped.
 Use of extreme caution is necessary when any fan
is used by or near children, disabled people, or
pets.
 Do not place the fan on any surface which might
allow the fan to tip over. The fan should always be
used on a smooth, level, non-combustible surface.
 Always unplug fan when not in use.
 Do not use the fan with the blade guards or any
safety device removed.
 Avoid using extension cords due to the risk of fire.
If an extension cord is necessary, the cord must be
a minimum 14AWG and rated for not less than
1875 watts.
 Do not run the power cord under carpeting. Do
not cover the cord with throw rugs , runners, or
the like. Arrange the cord to avoid traffic areas.
 Do not insert or allow any object to enter any
opening of the fan. Doing so may cause an electric
shock and/or a fire hazard.
Save These Instructions
WARNING: SHOCK HAZARD
Use your fan only in dry environments. This fan is not
intended to used in any location where it may come
into contact with water or condensation.
WARNING: HOT SURFACES
Do not touch the fan motor when in use or immediately
afterward. The motor gets hot and may cause burns.
WARNING: FIRE HAZARD
Fans have arcing or sparking parts inside. Do not use
near anything combustible such as gas, gas fumes, or
sources of heat. Do not use near paint or other
flammable materials. To prevent any possible fire, do
not block any air intakes or exhausts.
TO PREVENT ELECTRIC SHOCK, this fan has a two-prong
plug that must be inserted into a matching, properly
grounded outlet. This fan has also been equipped with a
polarized plug (one blade is wider than the other). This
including
the
following

Advertisement

loading

Summary of Contents for FanFair FTF-3010

  • Page 1  Use of extreme caution is necessary when any fan Instruction Manual is used by or near children, disabled people, or Model: FTF-3010 pets.  Do not place the fan on any surface which might allow the fan to tip over. The fan should always be used on a smooth, level, non-combustible surface.
  • Page 2 (4) to ON. Do not operate this fan if it has any visual defects. For CAUTION: repairs under warranty, contact FanFair’s Customer Do not use the fan without a base or lying on the side. Support for assistance.
  • Page 3 Manual de Instrucciones  No coloque el ventilador en superficies que Modelo: FTF-3010 puedan permitir que el ventilador caiga. El ventilador debe colocarse sobre superficies suaves, niveladas e incombustibles.  Desconecte cuando no esté en uso.
  • Page 4 adecuadamente en una toma de corriente debidamente Cómo Utilizar el Ventilador: aterrizada. Este ventilador también cuenta con un enchufe Para ajustar la velocidad del ventilador, presione polarizado (una pata es más grande que la otra). Esto reduce cualquier botón deseado (3). el riesgo de descarga eléctrica o fuego asegurándose que solo Prenda o apague la oscilación al oprimir el botón de puede conectarse de una sola forma.