Download Print this page

FanFair FSF-1610 Instruction Manual

16” pedestal fan

Advertisement

Available languages

Available languages

Quick Links

16" Pedestal Fan
Instruction Manual
Model: FSF-1610
Features:
Wide Area Oscillation
ON/OFF Push Button with 3 Speed Settings
High Performance 18" Blades
Steel Safety Grill
6' Cord
Use:
This product is intended for indoor residential or office
use only. Not for industrial or other commercial use.
Use only if the electrical wiring is in good working order
and meets applicable codes and ordinances. If you have
any questions whether the wiring is adequate, consult a
licensed electrician.
While using your product, follow all instruction listed
below. As part of those instructions, we have used the
word WARNING. Disregarding warning may result in
injury or death.
Instructions:
As with all electrical appliances, basic safety precautions
should always be followed to reduce risk of electric
shock,
fire,
or
injury,
precautions:
 Read all instructions before using this fan.
 Use this fan only as described in this manual. Any
other use not recommended by the manufacturer
may cause electric shock, fire, or injury.
 Do not operate this fan with a damaged cord after
the fan malfunctions, or has been dropped.
including
the
following
 Use of extreme caution is necessary when any fan
is used by or near children, disabled people, or
pets.
 Do not place the fan on any surface which might
allow the fan to tip over. The fan should always be
used on a smooth, level, non-combustible surface.
 Always unplug fan when not in use.
 Do not use the fan with the blade guards or any
safety device removed.
 Avoid using extension cords due to the risk of fire.
If an extension cord is necessary, the cord must be
a minimum 14AWG and rated for not less than
1875 watts.
 Do not run the power cord under carpeting. Do
not cover the cord with throw rugs , runners, or
the like. Arrange the cord to avoid traffic areas.
 Do not insert or allow any object to enter any
opening of the fan. Doing so may cause an electric
shock and/or a fire hazard.
Save These Instructions
WARNING: SHOCK HAZARD
Use your fan only in dry environments. This fan is not
intended to used in any location where it may come
into contact with water or condensation.
WARNING: HOT SURFACES
Do not touch the fan motor when in use or immediately
afterward. The motor gets hot and may cause burns.
WARNING: FIRE HAZARD
Fans have arcing or sparking parts inside. Do not use
near anything combustible such as gas, gas fumes, or
sources of heat. Do not use near paint or other
flammable materials. To prevent any possible fire, do
not block any air intakes or exhausts.
TO PREVENT ELECTRIC SHOCK, this fan has a two-prong
plug that must be inserted into a matching, properly
grounded outlet. This fan has also been equipped with a
polarized plug (one blade is wider than the other). This
reduces the risk of electric shock or fire by ensuring it
can only be plugged in one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still doesn't
fit, have a licensed electrician change your outlet. Do
not attempt to defeat this safety feature.
Do not operate this fan if it has any visual defects. For
repairs under warranty, contact FanFair's Customer
Support for assistance

Advertisement

loading

Summary of Contents for FanFair FSF-1610

  • Page 1  Read all instructions before using this fan.  Use this fan only as described in this manual. Any Do not operate this fan if it has any visual defects. For repairs under warranty, contact FanFair’s Customer other use not recommended by the manufacturer Support for assistance may cause electric shock, fire, or injury.
  • Page 2 How To Assemble: Step 1: Step 2: Assemble the stand with the base as shown using the Place the decorative cover as shown. You may need to included 4 screws. remove the thumbscrew. Step 3: Step 4: With the thumbscrew loosened, pull out the chrome Assemble fan control panel/motor onto the chrome extension pole.
  • Page 3 How To Oscillate: The oscillating control button is located on the top of the motor housing. Simply press down to oscillate and lift up to stop the oscillation. Cleaning: CAUTION: Before cleaning the fan, be sure to disconnect the power cord. Clean the grill with a clean damp cloth.
  • Page 4 No ponga el ventilador en cualquier superficie que Instruction Manual pueda permitir que el ventilador se caiga. El ventilador siempre debe utilizar sobre una Model: FSF-1610 superficie lisa, nivelada, y no combustible.  Siempre desconecte el ventilador cuando no esté en uso.
  • Page 5 No trate de alterar esta medida de seguridad. No utilice este ventilador si tiene algún defecto visual. Para reparaciones por garantía, póngase en contacto con Soporte al Cliente de FanFair para obtener ayuda. Cómo Ensamblar: Ensamble la rejilla trasera en la caja del motor.
  • Page 6 con un paño limpio y húmedo. No utilice productos Paso 4: químicos o limpiadores abrasivos. NO SUMERJA EL VENTILADOR O CUALQUIER CABLE EN AGUA. Vuelva a poner la rejilla frontal antes de usar el ventilador nuevo. Permita que el ventilador se seque por completo antes de usarlo.