How To Restart Sensor Through Magnet - CNDINGTEK DO200 Configuration Manual

CN470 Band 470.3,470.5,470.7,470.9,
(470-510MHz) 471.1,471.3,471.5,471.7,
EU868 868.1,868.3,868.5
(863-870MHz)
US915 902.3,902.5,902.7,902.9,
(902-928MHz) 903.1,903.3,903.5,903.7
AU915 915.2,915.4,915.6,915.8
(915-928MHz) 916.0,916.2,916.4,916.6
AS923 923.2,923.4
(915-928MHz)

4 How to restart sensor through magnet?

Magnet:
Move the magnet around the probe one turn and remove the magnet. This process
restarts the device. If the device is successfully rebooted, will initialize the device,
and the device will report a data that is displayed as being not occupied state.
Beijing Dingtek Technology Corp., Ltd.
http://www.dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022
The default uplink
frequency
DO200 Parking Occupation Sensor_LoRaWAN_V2.1
500.3,500.5,500.7, RXWIN1
500.9501.1,501.3,5
01.5,501.7
868.1,868.3,868.5
923.3,923.9,924.5,
925.1
925.7,926.3,926.9,
927.5
923.3,923.9,924.5,
925.1
925.7,926.3,926.9,
927.5
923.2,923.4
Tel:86-10-64718863,64753700
E-mail: service@dingtek.com
505.3 RXWIN2
869.525
923.3
923.3
923.2
Page 5