Protocol And Api Interface; Faq - CNDINGTEK DO200 Configuration Manual

DO200 Parking Occupation Sensor_LoRaWAN_V2.1
Notes:
1 If you need to configure other LoRaWAN parameters, such as DevEui, AppEui, etc.,
send the corresponding command on this serial port. For details of other
instructions, please refer to the LoRaWAN module AT command manual.
2 After configuring the LoRaWAN parameter and restarting the device with a
magnet, you can exit the configuration of the LoRaWAN parameter mode to make it
work normally.

8 Protocol and API Interface

The communication protocol(API Interface) is confidential is only open for customer
who has purchase the device and sign the NDA(non-disclosure agreement) file with
CNDingtek and his own Company. Please contact our sales team
service@dingtek.com if you want to integrate the protocol/API with your own
system.

9 FAQ

A1:no battery connected;
Q1 Why can not I see the device data?
Considering shipping rules, some is not connected for battery. So user should open
cover and connect battery with the pcb board. For some version with magnetic part
outside, please remove the magnetic part, then the battery will power on the sensor.
Q2 Is it possible to modify the LoRaWAN parameters, such as deveui, appkey
Yes, You can modify the LoRaWAN parameters by serial port. Please refer to part7
or band and so on?
of this manual.
Beijing Dingtek Technology Corp., Ltd. Tel:86-10-64718863,64753700
http://www.dingtek.com E-mail: service@dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022 Page 16