Folding - GPAD Storm User Manual

P0: Speed unit - switch speed units (km/h or mph)
password when you turn on the scooter. The default password is 1111.
P3: Set password -
Next time you turn on the scooter, you'll be prompted to enter the password you set. First enter your password,
to confirm the password, have the last digit of the password selected and then shortly press the M button.
the value to OFF to disable it.
mode will also disengage the cruise control.
Error codes
100, 101 -
200 -
300 -
400 -
500 -
600 -
700 -
5 (ENG)
handlebar not mounted to the steering column. To
mount the handlebar, you will first need to unscrew
and remove the top cap at the steering column
using the 4mm hex key (figure 1). Align the
handlebar hole on top of the steering column and
the steering column and replace the stem cap as
shown on figure 2. Tighten the three bolts shown
handlebar is fixed make sure that all the bolts of the
secured. Tighten the bolts if any of the components
are loose.

5. Folding

Turn your scooter off before
4.
folding. To fold or unfold the
A
catch marked figure 4 as A. Then
B
pull back on the quick release
lever marked as B on figure 4. If
you have difficulty moving the
quick release lever push the top
of the steering column forwards
as you pull the lever.
DO NOT ride the scooter if the folding mechanism is damaged or if the locking pin is not properly secured.
1. 2.
Stem cap
4mm
Stem
A
Once the scooter is in the desired
5.
B
A
down on the quick release lever
C
marked as A on figure 5. Make sure
the locking pin marked as C on
figure 5 fits securely into the cavity.
Once the quick release lever is in its
folding lever catch marked as B on
figure 5.
3.
4mm
C
B
6