iRobot Roomba 4110 Quick Start Manual page 3

irobot
Maintenance
Perform these maintenance tasks after every 3 uses:
remove and empty
1
roomba's bin
Press button and
pull to remove bin
clean roomba's filter
2
compartment
a. Clean or replace filter*
B. Clean filter
compartment
Empty bin
*Replace filter every two months
roomba
® ®
clean roomba's brushes
3
a. Remove brush guard by pulling
both yellow tabs
B. Remove and clean Roomba's
brushes. Remove brush caps and
use scissors to cut any hair wrapped
around the brush. Use the Roomba
cleaning tool to comb hair from brush.
Brushes
Brush
caps
c. Remove and clean hair and dirt from
Roomba's brush bearings.
quick start guide
see Owner's Manual for detailed
product instructions.
instructional photos are available at:
www.irobot.com/usetips
Features may vary by model.
Brush
bearings
© 2006 iRobot Corporation, 63 South Avenue, Burlington, MA 01803. All rights reserved.
iRobot, Virtual Wall and Roomba are registered trademarks of iRobot Corporation. AWARE,
Home Base, Dirt Detect and Discovery are trademarks of iRobot Corporation.
US Pat. Nos. D510,066 | 6,883,201 | 6,690,134 | 6,809,490 | 6,594,844.
Other patents pending.
132.06