IRiver H10 20GB Quick Start Manual

A A
< bottom of player >
charging indicator
B B
Basic Operation Basic Operation
1. Software Installation
Insert the installation CD, the software installation will
begin automatically.
Follow on-screen instructions to complete the
software installation.
2. Power On/Off
a. Press the
b. Press and hold the
the player.
3. Menu/Navigation
a. Navigation uses a combination of buttons:
a. Touch-pad for scrolling up and down menus
b. button to select items
c. button to return to the previous screen
*At any time, press and hold the
to the main menu screen.
4. Connect the H10 to a PC
a. Connect the included USB cable to the port on the H10
then to an open USB port on your computer.
b. Power on the player by pressing the
c. The LCD screen will display "USB Connected".
d. Windows may show "Found New Hardware" when the player
is first attached.
e. The H10 will appear as a new device under My Computer
The H10 is now installed and working properly. Please see the reverse side for steps to load music onto the H10.
button to power on the H10.
button to power off
button to return
button.
H10 H10

QUICK START GUIDE

This guide shows examples from Windows XP only.
Charging The Player Charging The Player
a. Plug the included USB/Charging cable into the H10.
b. Plug the included AC adapter into a wall outlet then into
the jack on the USB/Charging cable. The charging indicator
light will illuminate on the cable.
c. The light will dim when charging is complete.
d. iriver strongly recommends that the player be fully charged
or connected to the AC adapter prior to performing the
functions below.
c
a
< bottom of player >
a
A
B
c
d
e
This guide shows examples from Windows XP only.
H10 QUICK START GUIDE
b
A
B