Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for ZKTeco Tripod Turnstile
Summary of Contents for ZKTeco Tripod Turnstile
- Page 1 Maintenance MANUAL Tripod Turnstile Version：2.0 Date：December, 2017...
- Page 2 2. Housing Cleaning and Interior Dust Removal Check for dirt such as smudges and stains on the tripod turnstile housing on a periodic basis. Use cleaning agents to remove dirt, wipe the surface with soft cloth, and then apply a layer of rust preventive oil.
- Page 3 @0.5Million Maintenance record Maintenance In good condition after checking (√) Clean after checking (C) Fasten after checking (F) Replace after checking (R) Mandatory items Housing cleaning and interior dust removal Mechanism oiling Check items Block arm Position Hook on the 24 V power recover spring...
- Page 4 2.0Million Maintenance record Maintenance In good condition after checking (√) Clean after checking (C) Fasten after checking (F) Replace after checking (R) Mandatory items Housing cleaning and interior dust removal Mechanism oiling Check items Block arm Position Hook on the 24 V power recover spring...
- Page 5 4. Appendix (Method and Tool) 4.1 Housing Maintenance and Interior Dust Removal Use cleaning cloth soaked with industrial alcohol to wipe the housing. Then apply a layer of rust preventive oil. If the arm for drop arm device is loose, tighten it clockwise, and use an Allen key to fasten ...
- Page 6 4.3 Master Board Replacement Remove wiring terminals from the master board, mark the ports (to ensure correct wiring of the new board), unfasten the four screws, take off the PCB to be replaced, install the new board, fasten the screws, and then reconnect the wiring terminals. 4.4 The 24V Power Supply Replacement Turn off the air switch and unscrew the four fixed screw,take off electrical mounting plate.
- Page 7 4.5 Mechanism Lubrication Apply lubricating oil inside the mechanism evenly while rotating the tripod turnstile arm, as shown in the following figure. 4.6 Mechanism Checking 4.6.1 Core Cover Removal Use an Allen key to unfasten fixed screws from the proximity switch blocker, take off ...
- Page 8 4.6.2 Unlock Solenoid Replacement Use an Allen key to unfasten the screws from the unlock solenoid, remove the terminal posts, and take off the unlock solenoid. Install the new unlock solenoid on the mechanism base, apply screw glue, use the Allen ...
- Page 9 4.6.5 Position Recover Spring Replacement Check whether the position recover spring is deformed and nuts are loose. Replace the position recover spring if deformed or fasten any loose nuts, as shown in the following figure. Figure: Testing the position recover spring 4.6.6 Hook Replacement Take off the unlock solenoid.
-
Page 10: Maintenance Tool Kit
5 Maintenance Tool Kit Allen key set Multi-blade screwdriver Scissors Lubricating oil Multimeter Industrial alcohol Anaerobic adhesives Cleaning cloth Rust preventive oil - 9 -...
Need help?
Do you have a question about the Tripod Turnstile and is the answer not in the manual?
Questions and answers