Related Manuals for ZKTeco OP1000 Series
Summary of Contents for ZKTeco OP1000 Series
- Page 1 User Manual OP1000 series Applicable Models: OP1000/1200, 1011/1211, 1022/1222 Version: 1.0 Date: December 2018...
-
Page 2: Table Of Contents
Content 1. Product Introduction ................................. 1 1.1 Model number and access control ........................1 1.2 Chassis design and dimensions .......................... 1 1.3 Function features ................................. 2 1.4 Electronic control system ............................2 1.5 Specifications ................................. 3 2. Electrical test before installation ..........................4 3. -
Page 3: Product Introduction
√ 1.2 Chassis design and dimensions OP1000 series is with SUS304 housing, anti-corrosion and durable. It serves as a carrier, equipped with the direction indicator, reader, infrared sensor, door lock, and more. It provides legal access to persons while eliminating illegal access by setting alarm prompts. In case of emergency, it ensures that evacuation passage runs smoothly and is convenient for personnel. -
Page 4: Function Features
It has the liquid crystal display function and can describe the channel operation in intuitive words. 1.4 Electronic control system The electronic control system of the OP1000 series is mainly composed of the reader, the master control panel, the access controller, the infrared sensor, the direction indicator and the alarm. -
Page 5: Specifications
1.5 Specifications OP1000 Series: L=500, W=180, H=1000 Dimension (mm) OP1200 Series: L=500, W=180, H=1000 Communication Input voltage RS485 AC100~240V, 50-60Hz DC 24V 5A, Input control signal Switching signal Output voltage DC 12V 3A Time of opening/ 5 s (adjustable) Passage rate... -
Page 6: Electrical Test Before Installation
There must be a distance of 100mm between the chassis and the wall for opening the top cover of the machine to perform maintenance and adjustment. The master and slave devices of OP1000 model can form a single channel or dual channels, as shown in Figures 3-1 and 3-2. OP1000 series User Manual... -
Page 7: Cables Installation
3-3. The input voltage of this machine is AC100-120V/200-240V and its master and slave are connected with a 6-core connection wire. When installing this swing barrier turnstile, you only need to connect it to the corresponding ports. Note that the PVC conduits must be buried 100mm under OP1000 series User Manual... -
Page 8: Equipment Installation And Fixing
It is recommended to mark a warning line on the ground, as shown in Figure 3-4, after the machine is installed, so as to instruct the pedestrian to stand behind the warning line during card swiping: Figure 3-4 OP1000 series User Manual... -
Page 9: Equipment Wiring And Debugging
4. Equipment wiring and debugging 4.1 Internal wiring diagram Figure 4-1 4.2 Master and slave wiring diagram The connection between the master and the slave is illustrated with red lines in Figure 4-1. OP1000 series User Manual... -
Page 10: Menu Introduction
After the gate is opened, it will automatically close if no one passes through within a certain time duration. The default value is 5 seconds. The current value is: xxx. Press “UP” or “DOWN” to change the value, then press “ESC” to return. The setting is completed. Press “ESC” to exit. OP1000 series User Manual... - Page 11 Whether to record the number of swiping. When the function is enabled, swipe several times to record several permissions. The current value is: xxx. Press “UP” or “DOWN” to change the value, then press ‘ESC’ to return. The default setting is disabled. OP1000 series User Manual...
-
Page 12: Operation And Instruction Of Menu
5.3 Operation and instruction of menu Press the ENT button, enter the password input interface. The default password is: UP, UP, DOWN, DOWN, DOWN, DOWN. You may press the ESC button to erase the last input. After entering the OP1000 series User Manual... - Page 13 UP or DOWN to choose a menu item, then press ENT to enter the interface and adjust such function or value. OP1000 series User Manual...
-
Page 14: Product Maintenance
The aged electronic components should be replaced. Attention: The maintenance procedure of the swing barrier above must be conducted by professional personnel. Always cut off the power supply before any maintenance and repair. Ensure all operations are safely performed. OP1000 series User Manual...