1. Component disassembly 1. Open the side plate with the triangle key. Note that there are two positioning posts under the side panel. When removing the side panel, first lift the side panel and then remove it. 2. Use a wrench to remove the four xed internal hexagon bolts counterclockwise. 3.
Page 3
2. shelf connection 1. Using 8 M6*16 inner six angle screw with the elastic gasket, connect the two H frame with the beam together. 2. Using 16 M6*16 inner six angle screw with the elastic gasket, connect H frame with the receiving tray together.
Page 4
3. wiring 1. Take the monitor from the package and install the screen and base. 2. Take the wireless keyboard and mouse and their USB receiver from it’s package and install battery. 3. Connect the VGA cable and monitor power cable on the top plate to the monitor. The receiver can be connected with any one of USB estension cable.
Page 5
4. Boot 1. After checking the line, you can directly use the key to turn the switch to "ON", then press the start button and wait for the device to start. 2. The initial login is automatically logged in as administrator by default. The default admin account and password are: user name: 9999, password: 123456.