Advertisement
•
Please read these instructions carefully before installation and keep safe for future reference.
IMPORTANT
This product should be installed by a competent person and in accordance with the current
IET Wiring Regulations and Building Regulations.
If in doubt,consult a qualified electrician.
•
Always turn off the mains supply before commencing work.
As the detector responds to changes in temperature, avoid the following situations:-
•
Avoid pointing the detector towards objects with highly reflective surfaces, such as mirrors
etc.
•
Avoid mounting the detector near heat sources, such as heating vents, air conditioning
units, lights etc.
•
Avoid pointing the detector towards objects that may move in the wind, such as curtains,
tall plants etc.
Switch the mains supply OFF first to prevent electric shock.
1. Remove the rear cover by removing the
screw and pulling off cover, refer to Dia:1.
Dia:1
'Orion Range'
Infra-red Motion Sensor - IP65
Model: OD103
Important Safety Instructions
FIELD OF DETECTION
INSTALLATION
Dia:2
2. Connect the mains in and load out
cable according to Dia: 2 feeding cable
through the silicon grommet.
Poor Sensitivity
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KingShield OD103
Summary of Contents for KingShield OD103
- Page 1 ‘Orion Range’ Infra-red Motion Sensor - IP65 Model: OD103 Important Safety Instructions • Please read these instructions carefully before installation and keep safe for future reference. IMPORTANT This product should be installed by a competent person and in accordance with the current IET Wiring Regulations and Building Regulations.
- Page 2 3. Secure the sensor back plate to the wall using two wood screws (ensure there is no wiring/gas/water services directly behind the screws) Dia:3. Dia:3 4. Position sensor onto back plate and secure using the screw removed in step 1. TESTING 1.
Need help?
Do you have a question about the OD103 and is the answer not in the manual?
Questions and answers