Hyundai HSC20V Instruction Manual page 6

b. Technical specifications
Information

The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool with another;

The declared vibration total value may also be used in a preliminary assessment of
exposure.
Warning

that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used; and

of the need to identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of the
operating cycle such as the times when the tool is switched off and when it is running idle
in addition to the trigger time).
Wear hearing protection
c. Intended use
This tool is designed for cutting wood that will fit in machine.
It is not suitable for cutting timber for fuel. Only use saw blades that are suitable for machine
and do not use cutting discs.
This tool is specially design to work with Hyundai range of battery and charger.
Tension
No load speed (/min)
Dia. of saw blade
(mm)
Cutting depth
Sound pressure level
Sound power level
Vibration
20Vd.c.
3800
￠165
54mm (90º )
40mm (45º )
LpA=85 dB(A),
K=3dB(A)
LwA=96dB(A),
K=3dB(A)
2
5.33m/s , K=1.5
2
m/s