Tv Buttons; Initial Setup - TCL C2 Series Operation Manual

TV Buttons

If the batteries in your remote control are run down, you can use the buttons on your TV set. They have the
following functions:
For models with below buttons on the set:
/◄
/►
Features (Short press)
(Long press)
For models with only one button on the set:
Power on/Standby
Note:
Figures and illustrations are provided for reference only and may vary depending on the model.

Initial Setup

The first time you switch the set on, the Welcome screen appears, which guides you through the initial setup
process. Follow the on-screen instructions to finish the initial setup process such as selecting the language,
connecting to the network, scanning channels, and more. During each step, either make a choice or skip the step.
If you skip a step, you can perform the setup later from the settings menu.
Note: If the channel search retrieved only the analogue channels it could be caused by poor broadcasting and
therefore is not covered by manufacturer warranty. Manufacturers cannot be held responsible for lack of or
poor broadcasting in some areas.
For models with below buttons on the set:
TV mode
P
P
Features (Long press)
OK (Short press)
9
Getting Started
In menus
▲
▼
►
◄
Features (Long press)
OK (Short press)