Parts And Features - Muskoka MWC30P Manual

FOLLOW WARNING CALL OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL
• Use two or more people to move and install your Wine Cooler. Failure to do so can result in back or other
injury.
• To ensure proper ventilation of your Wine Cooler, the front of the unit must be completely unobstructed.
Choose a well-ventilated area with temperatures above 60˚ F (16˚C) and below 90˚F (32˚C). This wine
cooler is designed for "indoor" use only. Do not use "outdoors".
• The Wine Cooler should not be located next to ovens, grills or other sources of high heat.
• The Wine Cooler must be installed with all electrical, water and drain connections in accordance with
state and local codes. A standard electrical supply (110 V AC only, 60 Hz), properly grounded in
accordance with the National Electrical Code and local codes and ordinances is required.
• Do not kink or pinch the power supply cord of the Wine Cooler.
• The fuse (or circuit breaker) size should be 15 amperes.
• It is important for the Wine Cooler to be levelled to work properly. There are 4 adjustable leveling legs
installed on this unit.
• All installation must be in accordance with local plumbing code requirements.
• Make certain that the pipes are not pinched or kinked or damaged during installation.
• Never allow children to operate, play with, or crawl inside the Wine Cooler.
• Do not use solvent-based cleaning agents or abrasives on the interior. These cleaners may damage or
discolor the interior.
• Do not use this apparatus for other than its intended purpose.

PARTS AND FEATURES

Control Panel
1
2 Levelling Leg (2 pcs)
LED Interior Light
3
Wood Shelves (3 full and 1 half)
4
5 Lower Retaining Bar (wire)
WARNING
1
2
3
4
5
3