Advertisement
Available languages
Available languages
Quick Links
H-9784, H-9785
METRO COLLECTION –
MOBILE PEDESTAL FILE
TOOLS NEEDED
Phillips
Screwdriver
A
Non-Locking Caster x 2
F
Metal Bar x 1
(x 2 for H-9784)
Figure 1
A
PAGE 1 OF 6
1-800-295-5510
uline.com
Drill
B
Locking Caster x 2
G
File Clip x 2
(x 4 for H-9784)
H
B
PARTS
C
D
Drawer Caster x 1
H
ST 3.5 x 14 mm
Screw x 19
ASSEMBLY
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching.
NOTE: Check that all parts are included.
NOTE: Tighten all screws with Phillips screwdriver.
1.
Remove casters and hardware from drawers.
2. Lock drawers using key and flip product upside
down. Align holes on the locking casters (B) with the
pre-drilled holes near the front of the unit. Attach
using eight ST 3.5 x 14 mm screws (H). (See Figure 1)
3. Align holes on non-locking casters (A) with the
pre-drilled holes toward the back of the unit. Attach
using eight ST 3.5 x 14 mm screws (H). (See Figure 1)
Para Español, vea páginas 3-4.
Pour le français, consulter les pages 5-6.
E
M4 x 34 mm Screw x 4
Handle x 2
(x 6 for H-9785)
(x 3 for H-9785)
I
Keys (Set of 2) x 1
0322 IH-9784
Advertisement
Related Manuals for U-Line METROH-9784
Summary of Contents for U-Line METROH-9784
- Page 1 Para Español, vea páginas 3-4. Pour le français, consulter les pages 5-6. H-9784, H-9785 1-800-295-5510 uline.com METRO COLLECTION – MOBILE PEDESTAL FILE TOOLS NEEDED Phillips Drill Screwdriver PARTS M4 x 34 mm Screw x 4 Handle x 2 Non-Locking Caster x 2 Locking Caster x 2 Drawer Caster x 1 (x 6 for H-9785)
- Page 2 ASSEMBLY CONTINUED 4. Unlock drawers and slowly pull out bottom drawer. Figure 2 Attach drawer caster (C) to the underside of the bottom drawer using three ST 3.5 x 14 mm screws (H) and drill. (See Figure 2) 5. Place pedestal file upright. Remove pre-attached Figure 3 handles (D) from inside of drawer and move to the outside of drawer.
-
Page 3: Herramientas Necesarias
H-9784, H-9785 800-295-5510 uline.mx COLECCIÓN METROPOLITANA – ARCHIVERO MÓVIL DE PEDESTAL HERRAMIENTAS NECESARIAS Desarmador de Cruz Taladro PARTES 4 Tornillos M4 x 34 mm 2 Asas 2 Ruedas sin Seguro 2 Ruedas con Seguro 1 Rueda de (6 para el H-9785) (3 para el H-9785) Cajón 1 Set de 2 Llaves... - Page 4 CONTINUACIÓN DEL ENSAMBLE 4. Abra los cajones y saque lentamente el cajón Diagrama 2 inferior. Fije la rueda para cajón (C) en la parte de abajo del cajón inferior usando tres tornillos ST de 3.5 x 14 mm (H) y un taladro. (Vea Diagrama 2) 5.
-
Page 5: Outils Requis
H-9784, H-9785 1-800-295-5510 uline.ca COLLECTION METRO – CLASSEUR MOBILE À CAISSON OUTILS REQUIS Tournevis cruciforme Perceuse PIÈCES Roulette non blocable x 2 Roulette blocable x 2 Roulette de tiroir x 1 Poignée x 2 Vis M4 x 34 mm x 4 (x 3 pour H-9785) (x 6 pour H-9785) Barre métallique x 1 Attache pour classeur x 2... - Page 6 MONTAGE SUITE 4. Déverrouillez les tiroirs et retirez lentement le tiroir Figure 2 inférieur. Fixez la roulette de tiroir (C) au dessous du tiroir inférieur avec trois vis autotaraudeuses de 3,5 x 14 mm (H) et la perceuse. (Voir Figure 2) 5.