Zenna Home BBHB75 Assembly Instructions Manual
Hide thumbs
Also See for BBHB75:
- Assembly instructions manual (10 pages) ,
- Assembly instructions manual (10 pages)
Advertisement
Quick Links
Assembly instructions - BBHB75, BBHB75AN (Bronze) / BBN75, BBN75AN (Satin Nickel)
Before You Begin:
Thank you for purchasing this product. Please identify all parts and hardware pieces before you begin.
When laying out parts, place them on a soft surface to prevent scratching.
Pg 1 of 10
IS0090-I
©2013 Zenith Products Corp.
MCS 11/5/2013
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Zenna Home BBHB75
Summary of Contents for Zenna Home BBHB75
- Page 1 Assembly instructions - BBHB75, BBHB75AN (Bronze) / BBN75, BBN75AN (Satin Nickel) Before You Begin: Thank you for purchasing this product. Please identify all parts and hardware pieces before you begin. When laying out parts, place them on a soft surface to prevent scratching.
-
Page 2: Tools Needed
Tools Needed: List of Parts: (A) 1 top piece (B) 3 shelves (C) 2 legs (1 right and 1 left) (E) 2 rear leg extensions (D) 2 front leg extensions (G) 2 front tubes (F) 2 rear tubes (H) 1 bottom brace Pg 2 of 10 IS0090-I... - Page 3 (2) 6 medium screws (1) 8 large screws (3) 4 small screws (4) 8 end caps (6) 2 wall anchors (5) 2 mounting screws Pg 3 of 10 IS0090-I...
- Page 4 Fasten front leg extensions (D) to the front of legs (C), using small screws (3). Fasten rear leg extensions (E) to the rear of legs (C), using small screws (3). Rear Parte posterior Arrière IMPORTANT Be sure to orient legs (C) so that the screw holes for the small screws (3) are located on the BACK of legs (C).
- Page 5 Insert end caps (4) into front and rear leg extensions (D,E). Insert a front tube (G) and a rear tube (F) to each leg assembly. Be sure to orient front tube (G) so that the end with the “dimpled” hole (hole with a slight indent surrounding it) is on the top.
- Page 6 Fasten 2 shelves (B) to the leg assem- blies. NOTE: Crosswires should be on the bottom of the shelf. NOTE: The cross wires should be on the bottom. NOTE: If these screw holes do not line up with the screw holes in shelves (B), then legs (C) need to be switched with each other.
- Page 7 Insert top piece (A) into top rear tubes (F). Fasten top shelf (B) to the assembly. Pg 7 of 10 IS0090-I...
- Page 8 Insert end caps (4) into front tubes (G) and top piece (A). Place unit in desired location. Attach the bottom brace (H) to the assembly, using large screws (1). Pg 8 of 10 IS0090-I...
- Page 9 Mount the unit to the wall. WARNING: FOR SAFETY REASONS, IT IS IMPERATIVE THAT THIS UNIT BE MOUNTED TO THE WALL. WE HAVE PROVIDED MOUNTING HARDWARE FOR YOUR CONVENIENCE. Mounting Instructions: Warning: Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing and gas lines.
- Page 10 Slide hook body down onto hangers. Make sure hook Hanger must slide betweeen two wires on either end of body slides between hanger wires. hook body. Pg 10 of 10 IS0090-I Learn more about other home bath & faucets by Zenna Home on our website.
Need help?
Do you have a question about the BBHB75 and is the answer not in the manual?
Questions and answers