Table of Contents
Advertisement
UT525/526 Operating Manual
XI. Replace Battery
Note
1. Do not use old and new batteries at the same time.
2. Pay attention to the polarity during replacing battery.
Danger
1. To avoid potential electric shock, move the lead from the instrument before
replacing battery.
2. When the battery cover is open, do not test
3. When sign "
replaced, please operate as following:
1) Turn off the power (namely make the dial plate point to OFF), and move
testing wires away.
2) Loosen screw on the battery cover, and move away the battery cover,
and then replace the 6 batteries.
3) After replacing the batteries, make sure that the screw is tightened
firmly.
(see Picture 6)
" is displayed on LCD, it means the battery needs to be
27
Advertisement
Table of Contents
