Related Manuals for MATO CMiNDTEK EP 100
Summary of Contents for MATO CMiNDTEK EP 100
- Page 1 Betriebsanleitung Operating Instructions Mode d`emploi EP 100 / EP 200 EP 300 / EP 400 Erstellt: Änderung: 76428 06/2010 01/14...
- Page 2 EP 100 / EP 200 EP 300 / EP 400 Suction side R1 " Pressure side 3/4" Suction filter Item Description Order No. Electric gear pump with 3m connection cable, mains plug for 220 V or terminal clamps for battery connection Suction hose DN24 700 mm long connecting thread DKR 1"...
- Page 3 Ensure that the 220V power socket is secured with at least 10 A. Ensure that you have a secure grip on the pump. Only use original accessories approved by MATO. In case of accidents caused by foreign parts liability cannot be accepted.
- Page 4 EP 100 / EP 200 EP 300 / EP 400 Repair / maintenance Before carrying out any repair or maintenance work, break off the power supply (unplug mains − plug) and relieve pressure on the system by opening the oil filler gun. Regularly check the pressure-bearing components (high pressure hose) as well as the current- −...
-
Page 5: Maintenance And Care
EP 100 / EP 200 EP 300 / EP 400 Maintenance and care: The electric vane cell pump works maintenance free. Regularly check the pressure-bearing components (pressure hose and oil filler gun) as well as the current-carrying parts of the pump for any damage or wear. Defective parts must be replaced immediately with genuine parts. -
Page 6: Specifications
EP 100 / EP 200 EP 300 / EP 400 Specifications: EP 100 EP 200, EP 400 Type EP 300 Voltage type 230V / 50 Hz Protection rating IP 55 Engine performance 0.37 KW 0.75 KW Security of the supply line 10 A 16 A Max Capacity (SAE 30 free outlet) - Page 7 Personne munie des pleins pouvoirs pour l’établissement des documents techniques : Está declaración perderá su validez en caso de una modificación no acordada con nosotros: Herr M. Haupt, MATO GmbH & Co. KG, Mühlheim/ Main Leitung Produkttechnik Mühlheim, den 07.01.2014 i.A.
Need help?
Do you have a question about the CMiNDTEK EP 100 and is the answer not in the manual?
Questions and answers