Table of Contents
Advertisement
Problem
The appliance makes an
unusual noise and vi-
brates.
The programme dura-
tion increases or de-
creases during pro-
gramme execution.
The washing results are
not satisfactory.
Too much foam in the
drum during the wash-
ing cycle.
After the check, activate the appliance. The programme continues from the point
of interruption.
If the problem occurs again, contact the Authorised Service Centre.
The necessary data for the service centre are on the rating plate.
CONSUMPTION VALUES
INTRODUCTION
See the web link www.theenergylabel.eu for detailed informa-
tion about Energy Label.
The QR code on the energy label supplied with the appliance pro-
vides a web link to the information related to the performance of
the appliance in the EU EPREL database. Keep the energy label
for reference together with the user manual and all other docu-
ments provided with this appliance.
It is also possible to find the same information in EPREL using the
link https://eprel.ec.europa.eu and the model name and prod-
uct number that you find on the rating plate of the appliance. Refer
to 'Product description' chapter for the position of the rating plate.
LEGEND
kg
Laundry load.
kWh
Energy consumption.
•
Make sure the levelling of the appliance is correct. Refer to "Installa-
tion instruction".
•
Make sure that the packaging and/or the transit bolts are removed.
Refer to "Installation instruction".
•
Add more laundry in the drum. The load may be too small.
•
The AutoAjust System is able to adjust the programme duration ac-
cording to the type and the laundry load size. Refer to "The AutoAjust
System load detection" in "Daily Use" chapter.
•
Increase the detergent quantity or use a different detergent.
•
Use special products to remove the stubborn stains before you wash
the laundry.
•
Make sure that you set the correct temperature.
•
Decrease the laundry load.
•
Reduce the quantity of detergent.
Possible solution
h:mm
Programme duration.
°C
Temperature in the laundry.
21
Advertisement
Table of Contents
