Marpo Kinetics VMX Removal Instructions
Hide thumbs
Also See for VMX:
- Maintenance and safety manual (11 pages) ,
- Manual (7 pages) ,
- Important information manual (6 pages)
Advertisement
Quick Links
Marpo Kinetics, Inc.
(925) 606-6919
258 LINDBERGH AVE, Livermore, CA 94551
•
• www.marpokinetics.com
- VMX –
IMPORTANT
INFORMATION
TO SAFELY REMOVE PRODUCT
FROM THE PACKAGE,
FOLLOW THESE INSTRUCTIONS
FOR SAFETY, TWO OR MORE PERSONS MUST ASSIST IN THE
PACKAGE REMOVAL AND PRODUCT INSTALLATION.
IT IS BEST THAT THE REMOVAL OF THE PRODUCT FROM THE
PACKAGE, BE DONE NEAR THE AREA WHERE THE PRODUCT WILL
BE PLACED FOR USE. THIS WILL ELIMINATE THE NEED TO MOVE
THE PRODUCT AROUND AFTER IT IS ASSEMBLED. SHOULD THERE
BE A NEED TO MOVE THE PRODUCT AROUND, THERE MUST
ALWAYS BE AT LEAST TWO PERSONS DOING THIS OPERATION TO
AVOID ANY INJURIES. TO PROTECT THE ROPE FROM SNAGS, IT
MUST BE KEPT WRAPPED UNTIL IT IS READY TO BE STRETCHED
ONTO THE PULLEYS.
REMEMBER, ALWAYS KEEP ALL BODY PARTS AWAY FROM
PULLEYS OR ANY OTHER MOVING PARTS AS THESE ELEMENTS
CAN CAUSE SERIOUS INJURY.
MINORS SHOULD NEVER BE ALLOWED TO OPERATE THE
MACHINE WITHOUT THE CONSENT AND CONSTANT SUPERVISION
OF AN ADULT.
1
Advertisement
Related Manuals for Marpo Kinetics VMX
Summary of Contents for Marpo Kinetics VMX
- Page 1 Marpo Kinetics, Inc. (925) 606-6919 258 LINDBERGH AVE, Livermore, CA 94551 • • www.marpokinetics.com - VMX – IMPORTANT INFORMATION TO SAFELY REMOVE PRODUCT FROM THE PACKAGE, FOLLOW THESE INSTRUCTIONS FOR SAFETY, TWO OR MORE PERSONS MUST ASSIST IN THE PACKAGE REMOVAL AND PRODUCT INSTALLATION.
-
Page 2: Main Unit
Marpo Kinetics, Inc. (925) 606-6919 258 LINDBERGH AVE, Livermore, CA 94551 • • www.marpokinetics.com Remove all wrapping material. CAUTION: Do not use blades to cut wrapping material since it may damage the unit. 2. Remove from the box the following components: MAIN UNIT, BENCH, BOOM, CROSS FOOT AND USER MANUAL TOOLS NEEDED: 7/16”... - Page 3 Marpo Kinetics, Inc. (925) 606-6919 258 LINDBERGH AVE, Livermore, CA 94551 • • www.marpokinetics.com 3. Assemble MAIN UNIT to the CROSS FOOT using four ¼-20 bolts and washers. Use a 7/16” flat wrench. HORSE SHOE BENCH CONNECTION 4. Install the BENCH onto the unit using three 3/8-16 bolts, nuts and washers. Tighten these bolts very well so there is no movement in this joint during use of machine.
- Page 4 Marpo Kinetics, Inc. (925) 606-6919 258 LINDBERGH AVE, Livermore, CA 94551 • • www.marpokinetics.com 6. Install the BOOM with four 3/8” bolts, washers and lock nuts. A second person must hold the boom until it is bolted down. Use 9/16” flat wrench and 7/32”...
-
Page 5: Adjustable Pulley
Marpo Kinetics, Inc. (925) 606-6919 258 LINDBERGH AVE, Livermore, CA 94551 • • www.marpokinetics.com 7. After making sure the rope is not twisted, place the rope over the TOP PULLEY and secure the link of the rope connection in the rope end cap with the ¼-20 x 1.25” set screw.