Advertisement
Place the work surface on top of the framework. Use the provided wood
8
screws to connect the top to the supports. There are pilot holes to help with
the process. Make sure the work surface is 1" apart from the wall.
Ensure wires and wire management is complete. Install the front
9
fascia with flip down door on to the wall mounted assemby by
using the mortise brackets on the side gables. Lift up, in and
down to engage.
2022 R1
Move the lifting columns to the highest
11
point for the final step. Slide in the top
laminate cover with grommets into the
assembly. The top laminate cover sits
on top of the upper lifting column
brackets, no fasteners are required.
Step 1
Step 2
BRC GROUP • www.brc.group • info@brc.group • 877.260.4309
No.10, 0.75in
Wood Screw
X8
Close the top flip door. It will be supported with a pre-installed
10
magnetic latch.
1" Required
from wall.
1"
Page 3 of 3
Advertisement
