Advertisement
Table of Contents
PICKET FENCE STYLE PLANTER BOX
Read all assembly and care instructions carefully before using this product. Save this manual for future reference.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
No.
A
B
C
D
E
F
G
HELPFUL HINT
This item was treated with teak oil at the factory. Apply a suitable wood oil at least once a year, or
when the wood looks particularly dry. Left untreated, the wood will weather to a silvery gray color.
LY453
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
Assemble components on a soft, clean surface to avoid damaging the finish.
Parts
Side Panel
End Panel
Bottom Panel
JCBC 60mm Bolt
Barrel Nut
Hex Key
Barrel Nut Driver
/
/
Order/Customer Reference Number:
LAM-474
Qty.
2
2
1
8
8
1
CHOKING HAZARD — This item contains small parts that
can be swallowed. Keep children away during assembly.
1
07/2020
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Page 1 / 2
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Sunnydaze Decor LAM-474
Summary of Contents for Sunnydaze Decor LAM-474
- Page 1 Order/Customer Reference Number: Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell. Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with the date of purchase as well as photos of the merchandise defect, must be provided.
- Page 2 ASSEMBLY Do not fully tighten any bolt until all bolts have been placed. NOTE: 1. Lay 2x Side Panel (B) face- down on a clean, soft surface. 2. With the slotted end facing upward, place 4x Barrel Nut (E) into each side panel. Use Barrel Nut Driver (G) to turn the barrel nut so the threaded hole aligns with the pre-drilled hole.
Need help?
Do you have a question about the LAM-474 and is the answer not in the manual?
Questions and answers