Table of Contents
Advertisement
This lever locks the work equipment, swing and attachment controls.
This lock lever is a hydraulic lock, so even if it is in the lock position,
the work equipment control lever will move, but the work equipment and
swing motor will not work.
2.
TRAVEL LEVERS (WITH PEDAL, AUTO-DECELERATION
MECHANISM)
• Do not put your foot on the pedal unless the machine is travel-
ling. If you leave your foot on the pedal and press it by mis-
take, the machine will move suddenly, and this may lead to a
serious accident.
• With the track frame facing to the near, the machine will move
in the reverse direction by forward travelling and in the for-
ward direction by reverse travelling.
When the travel lever is used, check to see if the track frame is
facing forward or backward. (If the sprocket is located to the
rear, the track frame is facing forward.)
FORWARD
The lever is pushed forward
(The pedal is angled forward)
REVERSE:
The lever is pulled back.
(The lever is angled back)
N
(Neutral): The machine stops
(
) This indicates operation of the pedal.
WARNING
11. EXPLANATION OF COMPONENTS
2-21
Advertisement
Chapters
Table of Contents
