Table of Contents
Advertisement
10
ICE & WATER INSTALLATION
Step 7.
Fit filter to brackets with water flow arrow pointing up.
Step 8.
Push shorter tube into tap fitting past insertion mark.
Step 9.
Push other end into filter INLET.
Step 10.
Connect remaining tube length into filter OUTLET.
Step 11.
Connect other end of remaining tube length to inlet on
bottom right hand side of refrigerator.
Step 12.
Turn on water and check all joints and tubes for leaks.
Step 13.
Reconnect the power.
Step 14.
Move the refrigerator back into place being careful not to
kink or split the tubing.
inlet location
Advertisement
Table of Contents
Troubleshooting
