Asphalt and concrete cutters
3.2. Visual Inspection of the Machine
Check regularly the machine for:
missing parts
released bolts and screws
oil or fuel leakage
3.3. Adding Fuel
1. Gasoline engines:
Use unleaded or leaded gasoline for motor
vehicles, with octane number 91 or more.
Top up fuel as necessary.
3.4. Check - Air Filter
Check the air filter for cleanness on a daily
basis. Clean or replace the filter if dirty.
Never run the machine with air filter missing or
damaged. Dust and dirt which get into the
engine would cause rapid wear.
Air filter -
BRIGGS & STRATTON
Page 14
free motion of the cutting disc spindle
Pay special attention to safety devices (covers)
and controls.
Never use dirty fuel or mixture with oil.
Avoid water and dust from entering the fuel
tank.
Fig.
Air filter - HONDA
Air filter - SUBARU
Operation manual
issued 01/2017