Table of Contents
Advertisement
en operation
Slide the measuring aid forwards.
2.
Fold the measuring aid down and
3.
click it into place.
Push in the detergent drawer.
4.
13.7 Adding detergent and
care product
Notes
¡ Do not use the measuring aid for
liquid detergent for gel detergents,
washing powder, or if Prewash or
"Ready in" time are activated.
¡ Observe the information about de-
tergents and care products
→ Page 28.
Pull out the detergent drawer.
1.
Pour in detergent.
2.
→ "Detergent drawer", Page 18
If required, add the care product.
3.
Push in the detergent drawer.
4.
30
13.8 Starting the programme
Note: If you want to change the time
until the programme ends, set the
"Ready in" time first.
Press inicio/pausa+carga .
▶
a The drum rotates and load detec-
tion takes place. This can take up
to 2 minutes, after which water
enters the drum.
a The display shows either the pro-
gramme duration or the "Ready in"
time.
a After the programme has ended,
the display shows: End .
13.9 Changing the activated
"Ready in" time
If you have set and activated a
"Ready in" time for a delayed pro-
gramme start, you can change the
"Ready in" time again before the pro-
gramme starts.
Requirements
¡ The programme is set.
→ "Setting a programme", Page 28
¡ The "Ready in" time is set and ac-
tivated.
→ "Buttons", Page 22
Press inicio/pausa+carga .
1.
The activated "Ready in" time is
paused.
Press termin.
2.
the display indicates the desired
"Ready in" time.
Press inicio/pausa+carga .
3.
The changed "Ready in" time is ac-
tivated.
13.10 Soaking laundry
Note: No additional detergent is re-
quired. The washing solution is then
used for washing.
Start the programme.
1.
repeatedly until
Advertisement
Table of Contents
