Table of Contents
Advertisement
Cleaning the drain pump
Requirement: The drain pump is
empty. → Page 33
Since water may remain in the
1.
drain pump, unscrew the pump
cap carefully.
The filter insert in the pump
‒
housing may become stuck due
to coarse particles of dirt.
Loosen the dirt and remove the
filter insert.
Clean the interior, the thread on
2.
the pump cap and the pump hous-
ing.
The pump cap is comprised of two
parts which can be taken apart for
cleaning.
Ensure that the impeller in the
3.
drain pump can rotate.
Cleaning and servicing en
Insert the pump cap.
4.
Ensure that the parts of the
‒
pump cap are correctly as-
sembled.
Screw the pump cap as far as it
5.
will go.
90°
The handle on the pump cap must
be in a vertical position.
Before the next wash
To prevent unused detergent from
flowing straight into the outlet in the
next wash, run the
after you have emptied the drain
pump.
Turn on the water tap.
1.
Insert the mains plug.
2.
Switch on the appliance.
3.
Pour 1 litre of water into compart-
4.
ment II.
Select a suitable programme for
5.
draining.
→ "Programmes", Page 23
programme
35
Advertisement
Table of Contents
