Self-Test & Service Information Display - Panasonic AG-1340P Service Manual

AG-1340P
c. Install the Cylinder Rotor Unit so that the inner hole of
the Cylinder Rotor Unit fits to the small projection (D) on
top of the Upper Cylinder.
d. Tighten 2 screws (B).
e. Install the Cylinder Stator Unit.
f. Tighten 2 screws (A).
g. Confirm the PG SHIFTER ADJUSTMENT with the
alignment tape (NTSC: VFM8080HQFP) and adjust it if
Fig. S8
Fig. S9
Fig. S10
necessary.
1.3.5. FLAT CARD CABLE
INSTALLATION
When installing the Flat Card Cable on the connector, install
the Flat Card Cable with the cable contacts facing the
connector contacts.
1.4. SELF-TEST & SERVICE
INFORMATION DISPLAY
Refer to the Service Manual for Z Mechanism Chassis. (Order
No.:VRD9802005C2)
10
Fig. S11