How To Replace The Lithium Battery - Panasonic AG-1340P Service Manual

1.2.

HOW TO REPLACE THE LITHIUM BATTERY

1.2.1. GERNERAL DESCRIPTION
There is a RAM in the IC6001, which is backing up the following
data by using the power source of B6001 (Back-up Battery).
1. Programme Navigation Data
2. TV Tuning Data
3. PG Shifter Adjustment Data
4. Option Setting Data
1.2.2. REPLACEMENT PROCEDURE
1. Remove the Top Panel and Mechanism unit with Main
C.B.A. by referring the Disassembling Procedure.
2. Unsolder the Lithium Battery: B6001 "CR2354-1GUF" and
then replace it into new one. (See Fig.B1)
NOTE:
The lithium battery is a critical component (Type No.:CR2354-1GUF Manufactured by Panasonic.)
It must nerver be subjected to excessive heat or discharge.
It must therefore only be fitted in equipment designed specifically for its use.
Replacement batteries must be of the same type and manufacture.
They must be fitted in the same manner and location as the original battey, with the correct polarity contacts observed.
Do not attempt to re-charge the old battery or re-use it for any other purpose.
It should be disposeed of in waste products destined for burial rather than incineration.
7
Fig.B1
AG-1340P