LG WKHC202H A Series Owner's Manual page 53

Problem
The appliance is being operated without the lint filter.
1F
• Insert the lint filter completely.
FILTER ERROR
• If
Power cord is connected incorrectly.
Ps
• Check the connection of the power cord to the terminal block.
POWER SUPPLY
ERROR
The dryer is paused or the dryer's drum rotates periodically.
<->
C=] ENd
• Wrinkle Care option is selected. (on some models)
• Turn off the appliance and unload all of the laundry from the appliance.
Operation
Problem
The appliance will Power cord is not properly plugged in.
not turn on.
• Make sure that the power plug is securely plugged into a grounded outlet matching the
House fuse is blown, circuit breaker has tripped, or power outage has occurred.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
The appliance does House fuse is blown, circuit breaker has tripped, or power outage has occurred.
not heat.
• Reset circuit breaker or replace fuse. Do not increase fuse capacity. If the problem is a
Selected cycle does not use heat.
• Some cycles default to unheated or air drying. Select a cycle that allows heated drying.
Water leaks. The water container hose or the optional drain hose is not connected correctly.
• Connect the water container hose or the optional drain hose correctly.
The door is closed while clothes or foreign substance is caught in the door.
• Check if clothes or foreign substance is caught in the door before using the appliance. If
The appliance runs This is normal operation for the Wrinkle Care option.
and pauses by itself
• Check to see if the Wrinkle Care option has been selected. The option is designed to
after the drying cycle
finishes.
Drying ended earlier The clothes are dried according to the Dry level or Dry mode setting.
than the initial
• If the humidity or temperature in the drum reaches the product setting, the dry cycle may
control panel time.
Clothes take too long Load is not properly sorted.
to dry.
• Separate heavy items from lightweight items. Larger and heavier items take longer to dry.
Large and heavy fabrics are loaded.
• Heavy fabrics take longer to dry because they tend to retain more moisture. To help
recurs, call for service.
1F
appliance's rating plate.
circuit overload, have it corrected by a qualified electrician.
circuit overload, have it corrected by a qualified electrician.
water leaks continuously, contact the LG Electronics Customer Information Center.
prevent creases that are formed when the clothes are not unloaded promptly after the
drying cycle. When the option is set, the appliance runs for 10 seconds and pauses for 5
minutes. The option runs for up to 2 hours.
end earlier than the control panel time.
Light items in a load with heavy items can fool the sensor because the light items dry
faster.
reduce and maintain more consistent drying times for large and heavy fabrics, separate
these items into smaller loads of a consistent size.
Possible Cause & Solution
Possible Cause & Solution
TROUBLESHOOTING 53