Samsung MS32J5133B Series User Manual page 14

Important safety instructions
INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface 85 cm above the floor. The surface should be strong
enough to safety bear the weight of the oven.
NOT FOR BUILT-IN INSTALLATION
1. When you install your oven, make sure there
is adequate ventilation for your oven by
leaving at least 10 cm (4 inches) of space
behind and, on the sides of the oven and
20 cm (8 inches) of space above.
2. Remove all packing materials inside the
oven.
3. Install the roller ring and turntable. Check
that the turntable rotates freely. (Turntable
type model only)
4. This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard. For your personal safety, plug
the cable into a proper AC earthed socket.
Do not install the microwave oven in hot or damp surroundings like next to a traditional
oven or radiator. The power supply specifications of the oven must be respected and any
extension cable used must be of the same standard as the power cable supplied with the
oven. Wipe the interior and the door seal with a damp cloth before using your microwave
oven for the first time.
CLEANING THE TURNTABLE AND ROLLER
RINGS
Clean the roller rings periodically and wash the turntable as required. You can wash the
turntable safely in your dishwasher.
SAVE THESE INSTRUCTIONS SAVE THESE INSTRUCTIONS
14 English
MS32J5133BT_AP_DE68-04345G-00_EN.indd 14
20 cm
10 cm
above
behind
10 cm on
85 cm of
the floor
the side
2015-06-04 5:19:02