Revision History - Denso Keyence Vision XG Series Manual

KEYENCE Image Processing System XG Series
Supported RC8
Version
Ver.1.0.0 Ver.1.1.2
Ver.1.0.1 Ver.1.3.6 and later
Ver.1.0.2 Ver.1.12.*
Ver.1.0.3 Ver.1.13.0
Ver.1.0.4 Ver.1.13.0
Ver.1.0.5 Ver.2.3.*
● No part of this manual may be duplicated or reproduced without permission.
● The contents of this manual are subject to change without notice.
● Every effort has been made to ensure that the information in this manual is accurate. However, should any unclear point, error
or omission be found, please contact us.
● Please note that we will not be responsible for any effects resulted from the use of this manual regardless of the above
clauses.

Revision History

DENSO Robot
Provider
User's Manual
First version
Addition of command "TriggerAndGetResult"
Addition of command " ReadInspectSetting "
Added Asynchronous command
Added GetCommandResult command
Added RecievePacket command
Modified TriggerAndGetResult command
Modified the sample program.
Modified version.
DENSO WAVE INCORPORATED
Content