Denso Keyence Vision XG Series Manual page 23

<ImplVar>.ChangeInspectSetting
Usage
Changes the setting to the inspection setting number of the specified SD card.
Syntax <ImplVar>.ChangeInspectSetting
setting number>
Description
The setting is changed to the inspection setting number of the specified SD card.
Example
Dim caoCtrl as Object
caoCtrl=cao.AddController("XG","CaoProv.KEYENCE.VWXG", "", "conn=eth:192.168.0.10")
caoCtrl.ChangeInspectSetting 1, 2
Argument: < SD card number> Specify the SD card number (Integer 1, 2).
< Inspection setting number> Specify the inspection setting number
(Integer 0 to 999)
< SD card number>, < Inspection
'Change SD card 1 inspection setting to No.2
23
画像処理システム／ＸＧシリーズ